Star Choice
Users
|
When
Delsand LLC was at the Yuma, Arizona Market during the
winter of 2008 - 2009 we had the opportunity to
work with several Star Choice customers.
The PDQ Signal stand, when used with Star
Choice’s 60E dish, did not have the same results that Dish
Network and DirecTV customers were having.
The signal was not
always found within the normal 5 minute time
frame.
It was determined
that while moving the dish to different azimuth
locations the dish was being moved ever so slightly from
the correct elevation and/or skew therefore missing the
very narrow and weaker
signal. |
|
This was not
acceptable!
A Solution was
needed.
We now
have Wonderful
NEWS!!
|
|
Delsand
LLC is happy to announce that we have tested the PDQ
Stand with Shaw Direct’s Star Choice TV satellite system
using the standard 60E dish. The result after the
initial calibration shows that the time needed to locate
a signal is less than 12 minutes.
The
signal strength & locations where tested
are:
Lake
Stevens WA. 80
signal strength
Sacramento CA.
60 signal strength
Yuma
AZ. 54
signal strength
The
stand can be order below or at the Arizona Market booth F123,
in Yuma AZ.
|
Some of
the differences between a Tripod and the PDQ Signal
stand:
|
Features |
PDQ
Signal |
Tripod |
|
Has a separate
Level to assure that the multiple Satellite LNB are kept
aligned |
X |
|
|
Check
for Line of Sight |
X |
|
|
Top
Heavy |
|
X |
|
Azimuth
Gauge |
X |
|
|
Elevation
Gauge |
X |
|
|
Skew/Tilt
Gauge |
X |
|
|
Number
of Legs |
4 |
3 |
|
Built-in Levels |
X |
|
|
Keyed
Mast * |
X |
|
|
Quick
Adjustment on Uneven Terrain **
|
X |
|
*PDQ Signal post is keyed
to the stand so that the dish is always in alignment to the
stand’s compass settings. A tripod is a post that has the dish
repositioned each time it is used.
**PDQ Signal has threaded ¾ inch rods for legs
allowing adjustments on each corner to allow for the stand to
be aligned to a Magnetic North.
**Most tripods do not have
easy leg adjustments. Some must use wedges or adjustments to the
ground for setting up on uneven terrain.
Made in the
USA
Patent Pending
Designed and Patented by Delsand LLC in Lake
Stevens, WA
Tooling Designed and Made by Ideality Inc. in
Stanwood, WA
Injection Molding in Nylon-6 Done in Mukiteo
and Everett, WA
Assembled, Boxed and Shipped in Stanwood,
WA
Home | Detail
Information | View & Purchase
Products
| Instruction &
Info Sheets
| About Us
Frequently Asked
Questions | Buzz Words | Links |
Conditions of
Use
Shipping & Returns
Sign In/Out
| Privacy
Notice | Site Map
Copyright © Delsand LLC
Site Developed by
EcomBuffet.com LLC
|
